Session Details


ALL EDUCATION (EXCEPT WORKSHOPS) ARE INCLUDED WITH YOUR REGISTRATION.

 

ARRIVE TO YOUR DESIRED SESSION AT THE SCHEDULED TIME/LOCATION, SEATING IS FIRST COME FIRST SERVE.

 

REGISTER NOW

 

Showfloor Location

Date

October 31, 2024

Start Time

08:30 AM

End Time

12:30 PM

Share This Session!

Rollforming for the Metal Construction Industry: Part 2

DESIGNATED MEETING ROOM: A315

“Material and How it Affects Metal Building Products in the Roll Forming Process” Presented by Brian Rogers

This presentation will focus on how material changes can make a difference in your products. When material is changed, it can make slight differences that may change your part. Adjustments may be necessary to keep the desired outcome. Die tonnage, roll design, and roll former overall strength issues will be included in the discussion.

“Creative Options for Punching/Shearing/Cutoff Challenges in the Metal Building Industry” Presented by Paul Williams

  • This session will help you understand the different types of punching and cutoff systems required for automating roll forming lines for the metal construction industry.

Learning Objectives:

  • Punching systems for purlins, studs, joists, corner beads, vertical commercial siding.
  • Stationary punching systems with servo-feeds.
  • Flying punching systems with electronic measuring.
  • High-speed rotary punching units.
  • Cut off systems for roof panels, siding panels, purlins, studs, joists, etc..
  • Measurement and acceleration methods.
  • What type of press is best for each application?.
  • Pre-shear and post-cutoff systems.

“Advanced Roll Forming of Steel Framing Components” Presented by Brian Rodgers

This presentation will provide insight into the latest advancements in roll forming system technology for the Steel Framing Industry. Discussions will focus on automated equipment change-over for material thickness, cross sectional variations, punched opening locations, and part lengths. Handling of the finished product in high-speed operations will be discussed. Also addressed, will be the level of operator training required. The advantages of programmable rotary punching and cutoff systems will be presented. Included, will be specific examples of these technologies being utilized in the manufacture of steel framing products.

“Requesting a Quote for Roll Forming 101: Let Us Help You” Presented by Brian Rodgers and Paul Williams

This brand new session will break down what information typically Roll Forming manufactures would need to provide an accurate quotation. It will break down differences between simple and full complex roll forming lines, tooling or machines / presses only. Information recommended for a quote request and Examples of RF!’s gone wrong will be presented. There will be time at the end to welcome and address your questions.

This workshop is located in meeting room #A315 and requires pre-registration, an additional fee and includes your exhibit hall pass.

Learn more about our NEW Value Pass option for the BEST DEAL for adding workshops to your agenda!

This workshop is presented by:

About the FMA:
The Fabricators and Manufacturers Association (FMA) supports the workforce lifecycle in the metal fabricating industry by bringing awareness of manufacturing careers to the next generation, helping metal fabricators to hone their skills, and engaging them through conferences and tradeshows. Founded in 1970, FMA is a co-founder and co-sponsor of FABTECH, the industry’s leading tradeshow, and the publisher of The Fabricator, The Tube and Pipe Journal, The Welder, The Fabricator en Español, Canadian Metalworking, and Canadian Fabricating & Welding.

Brian Rodgers, Sr.

Application Engineer, FormTek Inc.

Brian began his experience as a roll form operator and realized he had a great interest in roll form methodology and entered an apprenticeship program to learn troubleshooting and department leadership. During the apprenticeship, his duties included new tooling tryout, troubleshooting of roll form processes, set up, and leadership. Brian became a supervisor with duties including scheduling and troubleshooting of 22 roll mill lines, 25 operators, and set up personnel. He then expanded into tool engineering where he focused on new tooling and continuous improvement projects. Additional duties included new tooling and equipment buy offs. He joined Formtek, Inc. to begin a new chapter in his career as a Senior Applications Engineer. Responsibilities in helping solve customer request using the roll forming process. Brian is currently a member of and a Past Chair of FMA’s Roll Forming Council

Paul Williams

VP of Business Development, Hill Engineering

Paul is the Vice President of Business Development for Formtek & Formtek Regional Sales Manager – West. He has over 40 years’ experience in the tool and die and rollforming industries as a toolmaker, field service technician, die design engineering, sales application engineering, product line manager, regional sales manager and director of sales. Paul received his schooling from the Tooling and Manufacturing Association in tool and die making and engineering, and has a Bachelor of Science in Business Administration. He has been with Hill Engineering since 1988 and has been a speaker and conference chairman for FMA, PMA and SME conferences, and has authored technical articles in leading industry publications. Paul served on the Fabricators and Manufactures Association ‘s Board of Directors as an Associate Director during 2013-2014, is a current member and past chairman of FMA’s Roll forming and Technology Council.