DESIGNATED MEETING ROOM: S225
This dynamic workshop presented by the Fabricators and Manufacturers Association (FMA) offers a series of expert-led presentations crafted specifically for current roll formers and newcomers ready to break into the metal construction industry.
“Considerations for Metal Building Roll formers” Presented by Shawn Huffman and Josh Beck
Participants will be challenged to think about panel, purlin, and trim roll forming in a production environment. How does technology apply to return on investment? What is the balance between technology and resources? Does automation help the bottom line? Understand equipment used in the production of metal building components, what components to look for when investing in equipment, and technology and efficiency as it relates to productivity.
“Introduction of Robotics and Automation to the Roll forming Industry” Presented by Josh Beck
This presentation offers a comprehensive look at the “how” and “why” behind integrating robotics and automation into your roll forming operations. It covers five key areas: bridging workforce gaps by leveraging automation, enhancing safety, and preventing injuries, demonstrating practical examples of where automation fits within the process, addressing and mitigating concerns related to robotics and perceived complexity, and maximizing ROI. Attendees will gain valuable insights into implementing automation in their operations and understanding the tangible benefits it can deliver.
“Improve Profitability & Competitiveness through Computer Integrated Manufacturing” Presented by Andy Allman
Learn how to eliminate production mistakes, minimize scrap, and improve your responsiveness to customer needs. Integrated roll forming and trim shop machine controls support downloading of production schedules, ensure the correct coil is used for every order, and can track everything that happens at each machine. Find out the true production capacity of your machines and who your best operators are. Use OEE to monitor productivity and Pareto analysis to help prioritize your continuous improvement efforts. As competition becomes more intense, you cannot afford to be stuck with a manual production control system.
“Proper Roll form Tooling Setup and Troubleshooting” Presented by Steve Ebel
Discover best practices for setting up and documenting roll form tooling. The session will also guide you through inspection of your roll former, methods for maintaining the machine face alignment and calibration techniques to achieve the best possible setup of roll form tooling. You’ll learn to build standardized processes for roll form tooling manufacture and pick up practical troubleshooting tips for the tooling and setup.
This workshop is located in meeting room S225 and requires pre-registration and additional fee.
Learn more about our Value Pass option for the BEST DEAL for adding workshops to your agenda!
This session is presented by our partnering association
About the FMA:
The Fabricators and Manufacturers Association (FMA) supports the workforce lifecycle in the metal fabricating industry by bringing awareness of manufacturing careers to the next generation, helping metal fabricators to hone their skills, and engaging them through conferences and tradeshows. Founded in 1970, FMA is a co-founder and co-sponsor of FABTECH, the industry’s leading tradeshow, and the publisher of The Fabricator, The Tube and Pipe Journal, The Welder, The Fabricator en Español, Canadian Metalworking, and Canadian Fabricating & Welding.
Presenters:
Shawn Huffman
Sales Manager, Beck Automation
Shawn Huffman has been with Beck Automation for twelve years, serving as the Sales Manager since joining the company. As a customer-focused manager, Shawn assists customers with technical support and the installation of software packages to ensure a service first approach. Beck Automation is a leading control system provider for the metal forming industry making production machines more efficient and profitable.
Josh Beck
Sales Representative, Beck Automation
Josh Beck worked in sales with The Bradbury Group since July of 2017 selling Bradbury and Hayes Panel/Purlin/Decking Roll formers and Trim Equipment (Folders/Slitters/Recoilers). He joined Beck Automation in October 2023 to also sell robotics and automation.
Andy Allman
President, AMS Controls Inc
Andy has been working in the roll forming industry for over 32+ years. Before becoming president, Andy was the VP of engineering at AMS and was heavily involved in the development of high-performance length control systems as well as computer integrated manufacturing software. He has a bachelor’s degree in computer engineering from Mizzou and a master’s in international business from St. Louis University. Andy is a member of the FMA Roll Forming Council.
Steve Ebel
President, Rollform Solutions Inc.
Steve is the President of Roll Form Solutions located in Grand Haven, MI. His initial entry into the roll forming industry began as a machinist making parts for roll formers and presses. From there he worked in the tool room, assembled roll form machines, and put complete roll forming systems together. He has also worked in sales, helping his customers with product development and design, along with quoting roll form tooling and systems. For eleven years, he held the position of Chief Engineer with a large custom roll forming company. In that function, he was responsible for process and product design, tooling quoting, supervision of Tool Engineers, and overseeing the design, build, and purchase of all roll forming tooling and specialized equipment. Steve has a degree in Applied Science Industrial Engineering and over 48 years’ experience in the roll form industry, which enables him to incorporate fundamental principles as well as problem solving techniques to various levels. He is a current member and Past Chair of FMA’s Roll Forming Council.